When drag Binary objects to Config folder/wiresheet and set Should Poll = True, the Binary object on the wiresheet shows that Present Value is <BLANK>. The Active Text and Inactive Text are <BLANK> and need to be filled in. Can these at least be pre-populated with</BLANK></BLANK>…View more
Posted by: David_Purser in SmartX for Niagara
Find more articles tagged with:
Issue Living Space Sensore goes offline after upgrading SmartX Controller firmware from 2.0x to 3.01 or later Product Line EcoStruxure Building Operation Environment Building Operation Room Controller (RPC) v3.01 or later Building Operation SmartX Li…View more
Posted by: David_Purser in Building Automation Knowledge Base
Find more articles tagged with:
I just listened to a discussion about BACnet/SC on youtube: What BACnet/SC can do to improve BAS cybersecurity, and what it won’t do BACnet SC - Secure alternative to BACnet by Jim Butler And my current thoughts are that since routers will be ones ro…View more
Posted by: David_Purser in Digital Buildings System Architects Forum
I installed Wireshark 3.0+ and have it working with Workplace Tech. Issue is that Wireshark now uses Npcap, instead of WinPcap for reasons listed here: https://nmap.org/npcap/vs-winpcap.html and here: https://wiki.wireshark.org/NPcap I find the abili…View more
Posted by: David_Purser in BACnet Troubleshooting
I have been using MSTPcap.exe with Wireshark 3.0.2 on Windows 10 1803 without any issue. However, I was unsuccessful when using 0.8.6 (and multiple machines I was configuring with customers).
Posted by: David_Purser in BACnet Troubleshooting
There is a need to support features and cybersecurity, while maintaining high reliability and documented version upgrade path.- LTS releases should be designated at the end verion before new feature set is introduced. This allows for those features t…View more
Posted by: David_Purser in Digital Buildings System Architects Forum
Because there are so many object in EBO, it leads to the following issues:1) Inconsistency between the similar objects using Workstation or Webstation "Force" is not consistent because it works differently across different fieldbuses Can the availabl…View more
Posted by: David_Purser in Digital Buildings System Architects Forum
I wish there was an ability to port probe from an Automation Server to see if a device was responding on a certain port at a certain IP address. Old school tools used for this would be ping or telnet, but some devices don't respond to ping commands. …View more
Posted by: David_Purser in Digital Buildings System Architects Forum
Site has been running for weeks with no issue. However, today 2 out of 3 MPc controllers had FB Programs that were not working today:AHU1 FB Program reported Status = Loading, DelB was not passing value after 1 cycleAHU2 FB Program reported Status = …View more
Posted by: David_Purser in SmartX Controller Field Trials
This has been reported from the field that BACnet Digital Schedules (on/off) in the MPc at SBO 2.0.0.1801 are uploaded into SBO 1.9 ES with BACnet Interface as Enumerated Schedules (0/1). The installation is to bring the controllers into existing SBO…View more
Posted by: David_Purser in SmartX Controller Field Trials
Find more articles tagged with: