Yes, the Trio QR450 radios can be set up to be compatible with the old ER450 and EB450 radios, by setting it up in “E Emulation Mode”. See the attached Product Migration Guide. See also part number TBURMNTKIT-ERQR, mentioned in the guide. ... View more

Hello, The Accutech replacement battery partnumber is actually listed on the casing itself, there is no need to open the field unit at all (only to replace the battery).   ... View more

Hello, The manual is correct since the IO board is dedicated to handle timestamping at 1ms resolution. The 575 controller board is operating on 1 core only which requires all executing tasks to be shared. ... View more

The difference is as follows:   Removing alarms: When the Remove or Remove Alarms option is selected, ClearSCADA/GeoSCADA removes the alarm from the Alarm Banner and Alarms Lists. Additionally, the alarm flag is cleared from other displays, such as Mimics. Removing the alarm creates a record in the Events List (see Events in the ClearSCADA Guide to ViewX and WebX Clients). Disable alarms: When the Disable Alarms action is used, alarms are disabled (withheld) for an item. This means that: •The alarm actions for the item, such as Acknowledge, are unavailable •Alarms for the item are no longer shown on the various Alarms displays. •ClearSCADA/GeoSCADA continues to detect alarm conditions for the item. When the item’s alarms are enabled again, the Alarms displays will show information about the item’s alarms. This will include any alarms that were detected while the item had its alarms disabled. •Any alarm redirections for the item are canceled while the item’s alarms are disabled. When the item’s alarms are enabled again, any redirections for alarms that occurred during the disabled alarm period are not applied. ... View more