Learn about the Community. Join our Core Community to Get Started

Schneider Electric Exchange Community

Discuss and solve problems in energy management and automation. Join conversations and share insights on products and solutions. Co-innovate and collaborate with a global network of peers.

Register Now
Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacement I/NET Controller NICAD Battery info

Issue

Replacement I/NET Controller NICAD Battery info., I/Net Batteries

Product Line

TAC INET

Environment

All I/NET controllers

Cause

Controller battery has failed, because the battery on the controller is over 5 years old  

Resolution

  1. The 3 pin version Battery is used for the NPR2000 and the DPU48K (MIP Board) -- part number 3/V80H-SLF (Note this battery has to be order from an outside Vendor and not Schneider Electric).
    Click here to view a PDF on this part.
  2. The 7910, 7920, 7930 7780 & 7940 use the 2 pin version -- part number 3/V80H-LPC (Note this battery has to be ordered from an outside Vendor and not Schneider Electric).
    Click here to view a PDF on this part.
  3. The battery used on the 7700, 7716, 7718, 7728, 7720, 7928, 7793, 7798B, & 7798C (and like controllers) is the Dallas/INET part number 801288-07. This also can be ordered from the Rockford order entry using 01-2100-545 (Old CSI P/N 801288-07). This battery also has an outside Vendor source from Power-Sonic P/N - PCBM-3.6
    Click here to view a PDF on this part.
  4. For battery testing process see How to test the NiCAD Battery on a Controller
Tags (3)
Labels (1)
No ratings