This was originally posted on APC forums on 2/18/2013
Less than 2 year old XS 1300 starting beeping. Battery icon showed no charge. Replaced batteries. Icon showed charging to 2 bars with new batteries then slowly bars disappeared. Now unit will not stay on at all. Pressing "On" results in short red flash at the LCD panel and a single beep. I did the "brain dead test" to reset memory but still the unit will not stay on and I used several different outlets for power source. Is the unit shot but the new batteries still good? Thanks. Len
This reply was originally posted by Angela on APC forums on 2/19/2013
you can try this -> http://www.apc.com/site/support/index.cfm/warranty-services/ups-factory-warranty-status/
APC Support can be contacted via phone or email in most locations -> http://www.apc.com/support/contact/index.cfm
This reply was originally posted by Bernard on APC forums on 2/18/2013
bq. I suggest that you get in touch with APC tech support via chat or by phone to check if your UPS is still in warranty and if you can have the unit replaced.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!