APC UPS for Home and Office Forum
Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 08:06 PM . Last Modified: 2024-03-26 01:36 AM
I have an older UPS 300 which we took out of use and tried to them us it again. We forgot to unhook the battery. So we bought a new one. I installed it and can not get the unit to work. I plugged it in and it beeps for a few seconds and then proceeds to beep every 5 seconds or so. I hit the reset on the back and no difference. The light on the front does not turn green or any other color it just proceeds to beep every 5 seconds.
I have the same model that we took off line for a few days. I plugged into the same plug to make sure it wasn't the plug. The second one is fine and charging, and ready to use.
What am I missing?
Thanks.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 08:06 PM . Last Modified: 2024-03-26 01:36 AM
I have an older UPS 300 which we took out of use and tried to them us it again. We forgot to unhook the battery. So we bought a new one. I installed it and can not get the unit to work. I plugged it in and it beeps for a few seconds and then proceeds to beep every 5 seconds or so. I hit the reset on the back and no difference. The light on the front does not turn green or any other color it just proceeds to beep every 5 seconds.
I have the same model that we took off line for a few days. I plugged into the same plug to make sure it wasn't the plug. The second one is fine and charging, and ready to use.
What am I missing?
Thanks.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 08:06 PM . Last Modified: 2024-03-26 01:36 AM
I have an older UPS 300 which we took out of use and tried to them us it again. We forgot to unhook the battery. So we bought a new one. I installed it and can not get the unit to work. I plugged it in and it beeps for a few seconds and then proceeds to beep every 5 seconds or so. I hit the reset on the back and no difference. The light on the front does not turn green or any other color it just proceeds to beep every 5 seconds.
I have the same model that we took off line for a few days. I plugged into the same plug to make sure it wasn't the plug. The second one is fine and charging, and ready to use.
What am I missing?
Thanks.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.