Any help PLEASE,?

[actel_apc]

This was originally posted on APC forums on 12/18/2013

---

i have AP9619 network card which i dont know its IP address, AND I CANNOT ACESS IT VIA SERIAL CABLE, MY CABLE IS 940-1525A, how can I know its IP or even change it, is there any way. Thank you

[BillP]

This reply was originally posted by Angela on APC forums on 12/18/2013

---

Also, maybe the method this poster used to discover the IP address could help you -> http://forums.apc.com/message/55814#55814

[actel_apc]

This was originally posted on APC forums on 12/19/2013

---

Hey Angela,

Thanks for your reply, I tried device IP configuration Wizard v5.0.2 available, but it didn't help, I will try the wire shark method and see if I can capture the IP, that's I good idea. I will let you know

[actel_apc]

This was originally posted on APC forums on 12/19/2013

---

Hey Angela, The link you sent was so useful, I used the wire shark and I captured the IP, THANK YOU SO MUCH FOR YOUR SUPPORT 🙂 🙂 🙂 🙂

[actel_apc · Accepted solution]

This was originally posted on APC forums on 12/18/2013

---

i have AP9619 network card which i dont know its IP address, AND I CANNOT ACESS IT VIA SERIAL CABLE, MY CABLE IS 940-1525A, how can I know its IP or even change it, is there any way. Thank you