Follow along for an enriching discussion with our CEO, Peter Herweck, and industry leaders for a captivating Global Keynote at #InnovationSummit Paris 2024. Watch recording and join the #ImpactMaker movement!️
One-Line and Riser Diagrams
LayoutFAST User Group Forum
The LayoutFAST User Group is a place where Specifiers, Contractors, and Panel Builders share their User experience with the tool and ask Schneider Electric experts questions to solve their issues.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-05-1012:59 PM
One-Line and Riser Diagrams
Good afternoon,
I was wondering how to go about substituting in our own symbols for the One-Line generation. We sent out an email a while back asking about some of the features and were told that we would be able to, but have not really had the time to dive into it and figure out how. Was hoping someone might be able to assist?
Customizing the LayoutFAST diagrams is simply a matter of editing the family.
Select the symbol
Click the Edit Family button
Make the desired changes in the Family Editor
Load the family into the project
When prompted, you will have two options:
Save the updated family. This will overwrite it where LayoutFAST will keep it stored on your PC. Future use of the diagram tool will utilize your updated version. (Note: the updated version will get overwritten when LayoutFAST updates are installed. Users should keep a copy of updated RFAs in an alternate location.)
Load the family into the project without saving. This will update the family in the project only. Future use of the diagram tool in other projects will utilize the original symbol families.
Please let us know if you have any other questions and thanks for using LayoutFAST!