Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-04-0911:15 AM
Fiber infrastructure using Corning EDGE Housings
We are installing new fiber infrastructure using Corning EDGE Housings model EDGE-01U-SP, MTP LC Modules ECM-UM12-05-93Q (LC Duplex to MTP (pinned), 12 Fibers) and MTP to MTP Trunk Cable Z757524QLZ88U010M (24 fibers),
Link copied. Please paste this link to share this article on your social media post.
Posted:
1 month ago
Hello Roni
ITA does not support cassette like network objects as a single/individual genome. Not yet at least. ITA also does not support trunk cables as an individual object. Not yet at least. So when you have items like the below examples you'd have to use this type of work-around in ITA.
To define a cassette like above you should consider defining these objects as separate network modules like the below example representing each cassette. In my below example I used my own simple names cassette-1 and cassette-2 but you'd substitute your own MPT name.
ITA will allow you to connect each cable separately in this case, so you'll have full ability to module each strand and see the connection/route info. There are open feature requests tied back to better handling of cassettes of these types as well as trunk cable connections outbound.