This question was originally posted by John on APC forums on 1/27/2014
I am getting a ton of emails from my enviromental monitor stating "EMU: Probe 2 ST inc temperature violation 118F 73F."
There was two spikes a day ago but I am still getting emails. Is the probe going bad? The temp's have stayed at 73F for over 60 days except the two unknown spikes.
Any ideas? I don't want to turn off the emails since there might be a true issue sometime.
This was originally posted on APC forums on 1/27/2014
Hi what model of environmental monitor are you using (?), or , is this from an APC UPS web/snmp card equipped with a probe ? Sometimes alerts can be "latching" and you need to physically reset the probe before the alerts will stop, but that usually applies to things like leak sensors.
This reply was originally posted by John on APC forums on 1/31/2014
I have an 9319. I "cleared" the alarms and that seemed to help. I will also update it since it has an old firmware.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!