Just bought a new APC H15 > where to plug 58" plasma
This was originally posted on APC forums on 10/16/2011
hey guys. I finaly bought the h15! I have a fairly good AV setup and wanted to protect all my gear,so after doing weeks of research and reading etc. I always came back to the apc h15, one of the no brainers was the fact it had AVR built in! that was a big plus for me. I just finished installing a dedicated 20 amp line for my gear and thought this would top it off!, I have it all hooked up and it is runnig fine. very well built, as well with me I had a loose scew holding down the corner of the pc board, So I just drove it back in, with a bit of blue loctite. I kinda have two questions
1) with my Denon 4311 it says that it should be plugged into analog filter, I was thinking since its more digital should I plu it into one of the digital banks?
2) with my 58" samsung plasma.. should it be plugged into the tv/ video filter? or because its on the bigger side be plugged into a high current filter?, but at the moment I have my emotiva xpa-5 amp plugged into one high current and my paradigm sub12 plugged into the other high current. Icould always go to the wall with my sub if my plasma should be plugged into high current.
all in all Iam veryhappy with the apc h15 both in build quality and performance, ( less the loose screw lol). any suggestions to my questions will be greatly appreciated, thanx Dean