This was originally posted on APC forums on 6/1/2009
I bought a Mustek Power Must 848 but when the power fails the UPS shuts down and the RED light (fault) goes on.
I have a Tower with 6 HDs, two DVDs, 6 Fans, etc, a 24” monitor and an ASUS eeebox 202 connected to the UPS.
If I only leave the Asus eeeBox connected to the UPS + the monitor and disconnect the UPS from the main outlet,
the UPS enters battery mode, BUT if I connect my Tower to the UPS and disconnect the UPS from the Main outlet,
than the UPS shuts down and the RED light (fault) lights up.
What seems to be the problem here? Is it a “small” UPS for my Configuration?
All the best,
This reply was originally posted by Angela on APC forums on 6/1/2009
what model UPS do you have? it should be located on the back or bottom of the UPS on a white sticker. we need to know this.
also, there is no fault light. from top to bottom on the Back UPS RS/XS/NS families, the LEDs are as follows:
i assume you mean overload. if its overload, and you hear a constant tone when this LED comes on, it indeed is being overloaded. please confirm the model and LEDs. thanks!
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!