APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-29 12:20 AM . Last Modified: 2 weeks ago
I have ten UPSs (SUA2200RMI2U) rating for input voltage of 230 VAC. My question is if this UPS can be connected to an electrical input as follows:
1) L1 - L2 - N --> two 120 VAC phases + Neutral.
I don't know if I will have some issues when I connect this UPS this way or I must connect this UPS as follows:
2) L - N - G --> 230 VAC + Neutral + Ground.
If I connect this UPS as I stated before as 120+120+N, what voltage rate I will have at the output?
Any help will be appreciated, and if anyone can give me some link so I can follow the right way to wire a UPS.
Thanks
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-29 12:20 AM . Last Modified: 2 weeks ago
I have ten UPSs (SUA2200RMI2U) rating for input voltage of 230 VAC. My question is if this UPS can be connected to an electrical input as follows:
1) L1 - L2 - N --> two 120 VAC phases + Neutral.
I don't know if I will have some issues when I connect this UPS this way or I must connect this UPS as follows:
2) L - N - G --> 230 VAC + Neutral + Ground.
If I connect this UPS as I stated before as 120+120+N, what voltage rate I will have at the output?
Any help will be appreciated, and if anyone can give me some link so I can follow the right way to wire a UPS.
Thanks
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-29 12:20 AM . Last Modified: 2 weeks ago
I have ten UPSs (SUA2200RMI2U) rating for input voltage of 230 VAC. My question is if this UPS can be connected to an electrical input as follows:
1) L1 - L2 - N --> two 120 VAC phases + Neutral.
I don't know if I will have some issues when I connect this UPS this way or I must connect this UPS as follows:
2) L - N - G --> 230 VAC + Neutral + Ground.
If I connect this UPS as I stated before as 120+120+N, what voltage rate I will have at the output?
Any help will be appreciated, and if anyone can give me some link so I can follow the right way to wire a UPS.
Thanks
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.