Originally published on Success Stories Corner by Nutan | July 19, 2021 09:25 PM
If you're connecting IS (intrinsically safe) or non IS signal from a hazardous area (Zone 1/2 or Div 1/2) to a Modicon PAC (M340/M580) or a Foxboro DCS, then the remote I/O system IS1+ can be used.
Our Technology Partner
A north Canadian fine chemical company had to automate an additional skid in hazardous area with IS (intrinsic safety) filed equipment.
Space in the control room and on the cable trays was limited.
Short installation time.
R. STAHL offered the remote I/O system IS1+
It was installed in hazardous area Zone 2 as space saving solution with small footprint.
The I/O modules have IS input/outputs integrated.
All I/O modules are “hot swappable” under power and hazardous condition.
Connection to the M580 with Ethernet IP.
Most cost-effective solution compared to point-to-point installation with barriers.
Easy integration into M580, with quick installation on site.
Learn more about our EcoStruxure Joint Solution Offer - Remote I/O IS1+ for EcoStruxure CPG
All registered members have full access to the Exchange Community and can post comments and start topics.
Have a question? Please contact us with details, and we will respond.
Look through existing questions to find popular answers.
Want to know more about Exchange and its possibilities?
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!
Register today for FREE
Already have an account?Log in