[Imported] Q Series Firmware to use for compatibility with E Series
>>Message imported from previous forum - Category:Trio Data Radios<< User: joelw, originally posted: 2018-10-17 22:43:10 Id:122 This is a re-posting from the obsoleted (October 2018) "Schneider Electric Telemetry & SCADA" forum.
**_Radio1: What version firmware do I need to load into the Q series to be able to use it as an Access Point with E series radios and intermix as remotes with E series remotes. Thanks._**
bevanweiss: Use the latest firmware, there is an option under the radio settings to use E-series Compatibility.
Q Series firmware 188.8.131.5274 added E-Series compatibility mode. So you will need to use that version or later. I always recommend using the latest though!
Re: [Imported] Q Series Firmware to use for compatibility with E Series
>>Responses imported from previous forum
Reply From User: joelw, posted: 2018-10-18 20:06:40 Q Series firmware 1.3.6 and newer will support backwards compatibility with the obsolete E Series radios. Trio Q Series firmware can typically be found with a simple online search.