Motion control in Unity Pro 13.1

[amikhailov]

I wonder how could I add the MDrive Plus (CAN version) to Unity PRO "Motion" section. Is it possible to get the correct MFB or a just piece of advice?

[AlastairF]

You need to add the eds file to the Unity Pro CAN hardware library using the Hardware Library Manager.

I'm not sure how compliant the MDrive eds file is against the CAN standards. The HLM reported a few errors on import.

Then the device will be available to selected (within Unity Pro/ Control Expert) from the Hardware Library as a CANopen device.

Unfortunately it is not possible to add this with MFB support.