General Purpose Library Control Expert / unity

[Kevingalvez12]

Hello community,

Have any of you used this library from modicon?

I want to try the DFB for atv630,930 that comes with it. I´m going to use momentum unity, so I want to make sure if this library is reliable and I will like to know your experience with it o or with any block, you have used from this libraries. 

Thank you very much. 

[AlastairF]

Yes, I have used this library with Control Expert. I have also used a variant in RemoteConnect for SCADAPackx7x.

I have tried different comms methods and data sources.

It supports data from DTM's and from IO Scanning.

You should have no problems using this with Unity Momentum with the hardware that supports IO Scanning.

Note there is a new release of the libraries as at this week.

Check the Exchange Store for the latest V2

Modicon Libraries 2020 – General Purpose V2 for Control Expert

https://shop.exchange.se.com/en-US/apps/63090

Modicon Libraries 2020 – General Purpose for AVEVA System Platform (OMI)

https://shop.exchange.se.com/en-US/apps/63087

Modicon Libraries 2020 – General Purpose for AVEVA System Platform (InTouch)

https://shop.exchange.se.com/en-US/apps/42031

[Kevingalvez12]

Thank you very much, for your answer, 

[MetinSakin]

I can not access the links can you check ?

[AlastairF]

Try ccoy and paste the links into your browser.

Another option is to search for "General Purpose Library V2"

I have been able to downkoad these using these links.

[MarcPommainvi]

The links didn't work for me either. Try the following link:

https://shop.exchange.se.com/en-US/apps/66288/general-purpose-library-v2-for-ecostruxure-control-exp...

If that doesn't work try going back to the 'Home' page of SE Exchange and then search for 'Modicon Libraries 2020'. When you get the search results you'll need to scroll down a little to see the 'General Purpose Library V2 for EcoStruxure™ Control Expert' option. Select it and then you'll be routed to the appropriate page.

Optionally, you can select the 'Products and Services' tab after the search to narrow down the results and you'll see what you're looking for at the top of the list.

I hope that helps!