Created: 2013-09-22 10:14 PM
I've been testing PM5560.
But i need to password for web access of pm5560.
So I want to know Web Password of PM5560.
Also, I can't find PM5560's user guide in knowledge base or Global Web Site.
My Questions below :
1. Does anybody know the password?
2. And is there a PM5560's user guide?
Please let me know.
The factory setting for all default passwords is "0000" (without the quotes) for the PM5100. Perhaps its the same for the PM5560 meter.
I think, Your answer is not correct.
You mean, When I setting up meter on front panel, PM5560's password is "0000". Isn't it?
But I mean, When I want to view meter data using web browser, I need to PM5560's ID / Password. Like below figure.
And PM5560's ID and password, there is no way to find.
If you know PM5560's ID/Password for web browser access, please let me know.
Your screen shot resembles an EGX Gateway web access logon window. I understand the PM5560 does not have an Ethernet port, so it may by connected to an EGX Gateway device which is Ethernet enabled. The factory logon credentials for the EGX300 is below:
NOTE: the username and password is case sensitive, so be sure to capitalize letters "A" and "G"
I don't understand what you mean.
My device(PM5560) have two Ethernet ports. And my screenshot is PM5560's web access logon window.
Also, you can look here for additional information:
Hi guys, all PM5000 range technical documentation is available at SE.com. Please check the link below:
PM5560 has 2 Ethernet port for daisy chain (one IP address) and will be released to market in November 2013. Please let me know if you have any further questions or feedback on the product.
If you have found your helpful answer please mark the correct response as the answer.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!