While running some tests on a custom ION7550 framework I observed that the "position" of the calibrated pulser module is not getting reset despite having done a master reset on the device.
I would assume the master reset clears out everything (logs, energy, demand, min, max, ect.). But it appears the position on these modules is always remembered.
I am outputting a kWh pulse on R1 (1 kWh= 1pulse -> Kt=1000. I do a master reset, energy registers reset. However when say 0.45kWh accumulates, the module pulses the port.
Is this normal intended behavior?
Did you do resetting when there was load ? If so one second after reset was done you will have energy accumulated for sure.
Have a question? Please contact us with details, and we will respond.
Look through existing questions to find popular answers.
Want to know more about Exchange and its possibilities?
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!
Register today for FREE
Already have an account?Log in