Hello,
I need to read the DI of some PM5560 devices and implement it to DCE
But it seems there are some troubles.
1) Web status and software status is not the same at digital Input
2) I installed newest firmware 2.4.3 but suddenly all DIs are "off"
and DOs are "on" -> but nothing is connected to DOs
by reading the modbus registers starting at 8915 the result is:
from the modbus register list:
Hello @Sven_Ortmann ,
Is this query still open?
If Yes, can you please suggest to upgrade the latest firmware and check this behavior?
Firmware download path: https://www.se.com/ww/en/download/document/PM5560_PM5563_V2.7.4_Release/
Regards,
Ramasamy N
Hello @Sven_Ortmann ,
Is this query still open?
If Yes, can you please suggest to upgrade the latest firmware and check this behavior?
Firmware download path: https://www.se.com/ww/en/download/document/PM5560_PM5563_V2.7.4_Release/
Regards,
Ramasamy N
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!