The ION 7300 series is an older series so these steps may not work. For the ION 7650 and other ION meters, in ION Setup - > Setup assistant -> Template -> Register Edit -> Energy -> Display -. Edit....
Although I don't have access to an ION7330 to confirm, I did check that the code for this feature (external write via comms to integrator output registers) appears to be available in firmware at or above V272. (approx 2002).
The ION 7300 series is an older series so these steps may not work. For the ION 7650 and other ION meters, in ION Setup - > Setup assistant -> Template -> Register Edit -> Energy -> Display -. Edit....
Although I don't have access to an ION7330 to confirm, I did check that the code for this feature (external write via comms to integrator output registers) appears to be available in firmware at or above V272. (approx 2002).
Hi @FirdousKhan ,
I pressed "Accept as Solution". Thanks you and thanks very much members who helped me.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!