Recently I had some questions of customers about ION7400, the most common question is: when the memory log (512 Mb) of this meter will be available to use all its storage capacity?
ION7400 Datasheet said only 10 Mb is available for Framework, what about the other 502 Mb?
Will be there a new firmware to enable all 512 Mb for ION7400 meter?
We have an ongoing project at this moment to "unlock" the memory on PM8000 / ION7400 meters. This will be done by a firmware upgrade and the total logging memory available will be 350 MB (the rest is used by the meter for other functions). This new firmware is scheduled to be available in November 2017.
I see that the PM8000 had it's memory bumped up in the V1.4.1 Firmware Update, but can't seem to find any official value on the Firmware PDF or any Technical Datasheets.
Do you know where I could find this information in ION Setup/PME, or in any Schneider documentation? Would be extremely useful as something to reference when discussing the meter's capabilities with customers.
Thanks in Advance,
— Scott Clysdale
page 2: "Increased onboard log storage capacity"
Was able to find out using a virtual meter and ION Setup, thank you for the referral.
Official value is 342MB.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!