I am using the latest ION 3.0.16182.01 from the Box folder to set up some CM4000 meter and there are still hicups in the "Disturbance" alarm configration: As shown below, for the "Swell Van/Swell Vbn/Swell Vcn" alarms, I checked the "Adaptive WFC untill Dropout" box for all three of them from the top to bottom, but when I was done with "Swell Vcn" and went back to "Swell Van" page, the screen automatically changed the opinion to "Adaptive WFC Full Duration". If I changed that one again back to "untill Dropout", the "Swell Vbn" one got changed to "Full Duration"...
The meter infor I am working on is below, and it is still relative new for a CM4000.
Would truely be appreciated if we can get this fixed. After all, CM4000 is probably the first bacth of powerlogic meters supported by ION Setup.
I've located the error in ION Setup (which I was incorrectly assuming how the firmware was using the bits needed to be asserted for the "Until Dropout" option was operating) and will be likely be available in the next available build in the next week or two.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!