Created: 2015-07-03 05:05 AM . Last Modified: 2020-04-20 05:37 AM
With IM10/20 range and IM400 range an hysteresis principle is apply with threshold alarm and prealarm levels
the principle is :
alarm is activated when default is at the threshold value; alarm is desactivated when default is 20% higher than threshold value. This is to avoid on/off alarm switching when a default is closed to the threshold
The same principle exists with old range XM/XML
An application note was just written explaining this hysteresis principle.
The purpose of this characteristic of the product is to ensure that if the insulation level fluctuates around the alarm threshold, the customer does not get many flickering alarms.
Notice that the competition IMDs (Bender...) use the same principle.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!