We are looking for dc voltage measurement of the 35V dc RMS voltage measured with 0.1ms / sample.
Input = 525V, this will be adjust with thyristof bridge for the correct AC voltage 10kHz switching frequency.
We want to measure the dc voltage 0-35v on the place where the red circle is placed below. This we need to read out in pme through modbus. Or with 0-20mA/ 0-10V
Did somebody already measured with this sample time? I don 't find a power meter with this capabilities.
It is a dc signal from 35v DC and current 16000A. The current probe is 0-10V = 0-20000A. This we read in the pm8000 analog input.
But we want the 35Vdc measurement connected to the pm8000 so we can calculate the energy.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!