Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
80679members
346676posts

M221 LOGIN FAIL

Ravi_Prabhat
Crewman
Crewman
0 Likes
4
567

M221 LOGIN FAIL

We have bought a new PLC (Model: TM221M16T, SV:1.10). We have connected the PLC to laptop with Schneider mini USB cable TQBMXXCAUSBH045. Ecostruxure software shows M221(USB) in local devices. But every time I try to login the PLC with ecostruxure software, it fails to login with advisory "Communication detection error, Verify USB cable, mod-bus driver parameters, controller connection, power supply."

Capture0.JPGCapture.JPG

Tags (3)
4 Replies 4
Bastian_Schmitz
Lt. Commander Lt. Commander
Lt. Commander

Re: M221 LOGIN FAIL

Hello,

Could you connect to an other TM221 controller?

Did you try to uninstall the USB driver and to reinstall ESME Basic?

For me it looks like an driver issue. 

The connection should be possible through Mini USB it is not neccassary to supply the controler additional via 24V DC.

Please check if the drive would be recognized corectly at the windows device manager

m221 treiber.PNG

Tags (1)
Ravi_Prabhat
Crewman
Crewman
0 Likes
0
557

Re: M221 LOGIN FAIL

The TM221 Controller is brand new. I don't have any other.

I tried MachineExpertBasic_V1.2_build65304  but still, not able to login. I reinstalled USB driver also, SchneiderPLCUSBDriverSuite V14.12.0.0. When I connect the controller, device manager shows M221 Controller. But still ecostruxure cannot login.Screenshot 2021-08-17 140626.jpg 

Tags (1)
Jayce83
Cadet
0 Likes
0
220

Re: M200 LOGIN FAIL

I have a plc TM200C32R. Try to connect it to my computer via mini-usb.. The computer detect the controller.,But i can't login,"communication detected error," something like that..But when i try to connect to other plc like TM200C24, no problem at all,i can connect and login to it..im using machine expert basic v1.2.. Anyone have an idea about it, why it can't connect to TM200C32R? 

Tags (1)
Asmawan_Putra
Crewman
Crewman
0 Likes
0
211

Re: M221 LOGIN FAIL

To check if the problem comes from electrical installation:

- unplug PLC power

- unplug laptop charger

- power PLC only by the aptop via USB cable

- try login again

It usually works for me. Please update me if it solves your problem. I want to know if it works for others.

Tags (1)