Posted: 2021-07-17 04:12 AM . Last Modified: 2021-07-17 04:15 AM
It is possible to run a simulation in Machine Expert EcoStruxure using PacDrive 3 Full Template without LMC?
I tried do it but it doesn't work. I mark "Simulation" option and next login, download application and after that I can't leave "Start" step into SR_MainMachine.
I'm hoping you can help me with it.
Posted: 2021-07-18 11:45 PM
the "simulation" option can be used to test pure logic in EcoStruxure Machine Expert without using hardware (LMC, M262, etc.). If you want to test a PacDrive application project we recommend to use LMC controller. You can set all drives to virtual mode and test your application.
Without LMC you cannot run PacDrive Applications or the Full Template as the "simulation" does not provide the any PacDrive firmware functions. In your case the START action is checking if the PacDrive Controller has booted up properly and will not receive any feedback as there is no response for a firmware function call.
Hope that helps.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!