New in the Community? Get started here

Schneider Electric Exchange Community

Discuss and solve problems in energy management and automation. Join conversations and share insights on products and solutions. Co-innovate and collaborate with a global network of peers.

Register Now
Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Discover the Exchange Community Top members of July 
Discover the latest features your community has to offer: register to the webinar here

Invalid Parity error in the Active Event view on a card swipe

Issue

When swiping a card, an Invalid Parity error occurs in the Active Event view or in the Access Event log.

Environment

  • Active Event view
  • Access Event log

Cause

This can either be caused by a reader malfunction or the reader being wired incorrectly. Specifically on the reader wiring they may have swapped the Data and Clock lines.

Resolution

Try swapping the Data and Clock line on the connector of the controller/IOU module.

Tags (1)
Labels (1)
No ratings