New in the Community? Get started here

Schneider Electric Exchange Community

Discuss and solve problems in energy management and automation. Join conversations and share insights on products and solutions. Co-innovate and collaborate with a global network of peers.

Register Now
Knowledge Base
Showing results for 
Search instead for 
Did you mean: 
Discover the Exchange Community Top members of July 
Discover the latest features your community has to offer: register to the webinar here

How to bring an MPM-VA online via ZigBee with the MPM Coordinator?


How to bring an MPM-VA online over ZigBee to communicate with the ZigBee Coordinator (which is also the MPM you have your IP interface with).




Cannot figure out how to get the MPM-VA to communicate over ZigBee to the Coordinator.


Use web interface on the bench to set up ZigBee Pro Extended Configuration on the "remote MPM-VA" to match the Coordinator's Channel, PAN ID, Extended Network ID, Stack Profile, Security Profile and Trust Center Link.

Save settings and save database to flash.

You can now disconnect the IP connection to the remote MPM-VA. Re-discover controllers from the Coordinator MPM. It will appear as a "peer" below the coordinator, i.e., it will not be "under it" like a Room Controller (stat) or TE2.

Tags (3)
Labels (1)
No ratings