New in the Community? Get started here

Schneider Electric Exchange Community

Discuss and solve problems in energy management and automation. Join conversations and share insights on products and solutions. Co-innovate and collaborate with a global network of peers.

Register Now
Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

- Who are the top users of September? Discover them here!

- Check out the ESS Active Energy Management Blog now! 

- Join us on October 23rd for a live Panel session to discuss The Power of a Sustainable Ecosystem with Hervé Coureil, Chief Digital Officer of Schneider Electric and other great speakers. Register here!

Conversion coefficient for an internal PI point

Issue

What are the correct conversion coefficients for an internal PI point?

Environment

I/NET Resident Point editor

Cause

Internal PI points are always the target of a calculated point.

Resolution

Internal PI points must use a conversion coefficient pair:

  • M = 1.0
  • b = 0.0
Tags (1)
Labels (1)
No ratings