I am Using Movicon next as a SCADA Software. My site located in a remote area. I need to connect OFS with Movicon Next via OPC UA. To do that What are the things needed to be installed on the site and which are the Ports to be Forwarded at the site firewall?
you need to install at site:
OFS with driver you need.
and OPC UA option checked.
port for firewall 48400
there is also FAQ for this question.
Hi, while trying to connect ofs opc with Movicon next , i'm getting bad certificate Host Name Invalid error. How can rectify this issue?.
Likely a bit late to the party on this, but might help someone in the future.
You likely don't have an appropriate SSL certificate assigned to the server.
You should have one with an appropriate subject alternative name associated. This will largely depend on how you end up referencing the server. Some common mistakes:
Essentially the SAN (Subject Alt Name) should include potential addresses used to reference the service internally.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!