43429members
217967posts

MNB 1000 TRIAC OUTPUTS

Highlighted
Cadet

MNB 1000 TRIAC OUTPUTS

Hello

 

the triac output in my MNB 1000 is not switching to 24 vca,  the triac led is red, and the WPT is showing the output ON

it happens in my 4 new MNB 1000.

4 REPLIES 4
Highlighted
Crewman

Re: MNB 1000 TRIAC OUTPUTS

Hi,

 

Sounds interesting - sorry to ask like this, but, what did Technical support say?

 

 

 

Аdvanced support on PLCs and HMIs for fun and glory
Highlighted
Crewman

Re: MNB 1000 TRIAC OUTPUTS

Hi again 🙂

 

 

If you had no chance to contact us, this is a start: https://www.schneider-electric.com/en/work/support/country-selector/get-support.jsp

 

Cheers

Аdvanced support on PLCs and HMIs for fun and glory
Highlighted
Cadet

Re: MNB 1000 TRIAC OUTPUTS

hi

 

the issue was solved,

 

The AC voltaje to triac outputs is sourced externally, in this case is not sourced from the controller.

 

 

 

Highlighted
Administrator

Re: MNB 1000 TRIAC OUTPUTS

Please post TAC I/A Series related questions in the TAC I/A Series forum (https://exchangecommunity.schneider-electric.com/t5/TAC-Vista-Forum/bd-p/tac-vista) so that it is seen by the correct audience,