EcoStruxure Power Monitoring Expert
Enter the EcoStruxure Power Monitoring community of experts and find answers to your questions about the EcoStruxure Power Monitoring Expert software. From IoT implementation to sensor integration and more, get support from experts and share your experiences by subscribing to the Schneider Electric Exchange forum today.
Link copied. Please paste this link to share this article on your social media post.
Hello Everyone!
I am having an issue with a PAC4200 meter while trying to make it run on PME.
I have created all that is necessary in the ION Handle application as well as in the Device Type Editor, however I can only read Voltages and Currents, as shown in the image below:
I have tried using an already made driver for PAC3200, but the issue persists.
Does anyone have a driver for this kind of meter that is working correctly or have any idea of what I might be doing wrong?
Thanks in advance for the support!
Raciunas
Link copied. Please paste this link to share this article on your social media post.
Hello @Raciunas, I would advise you to post your question in this community instead: Power Management Systems
The community of experts there will be able to give you the right answer!
For that, just click on the 3 dots at the top right of your post, then select "Move message" and select the community Power Management Systems
If you have any access issue, please let me know, I am here to support you
Link copied. Please paste this link to share this article on your social media post.
Hello @Raciunas, I would advise you to post your question in this community instead: Power Management Systems
The community of experts there will be able to give you the right answer!
For that, just click on the 3 dots at the top right of your post, then select "Move message" and select the community Power Management Systems
If you have any access issue, please let me know, I am here to support you
Link copied. Please paste this link to share this article on your social media post.
Hi @Omaelk, the "Move message" option is not available to me.
I'll mark this post as resolved and re-post it to the correct community.
Thanks for the support!
Link copied. Please paste this link to share this article on your social media post.
Let me know how this goes for you. I just visited a customer that has (3) Siemens 4200 meters and we are wanting to bring them into our new PME 9.0
As they have ION protocol i'm hopeful we can find a driver or someone who has developed a driver for this version of PQ meter from Siemens. If not we're looking at PM8000 meter replacements.
Thanks and good luck.
Paul C.
Link copied. Please paste this link to share this article on your social media post.
Hello @pcruz_votawelec
The PAC4200 is NOT an ION meter. This is a Siemens meter. The only interface to this meter with PME is through modbus.
Regards,
Charles
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.