This knowledge base document do not intend to explain how to create a EPE supervision project but to give best practice advises on how to customize a EPE project based on General Purpose Library – GPL Situational Awareness.
Software versions used in the kb: EcoStruxure Hybrid DCS 2019. GPL SA R2.
This kb also apply to EcoStruxure Process Expert 2020 and further versions based on GPL SA.
The GPL SA workspace include project is based on Citect Scada Situational Awareness template.
The General Purpose Workspace leverage from Citect Scada Parameter Page Logo as show on the picture ...
Keep reading this article to learn how to customize the GPL workspace with customer logo.
The best way to experience and learn the General Purpose Library is to run the Demonstration Project and explore its features and configuration.
The attached document is to provide a step by step guide for the installation and setup of the General Purpose Library (GPL) with Wonderware System Platform using the supplied Demonstration Project.
The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.