This was originally posted on APC forums on 4/4/2013
what is the charging voltage of APC SURTD3000XLI SYSTEM. i am getting it 220volts in my system but showing battry fault and tripping. so i have chacked it on another set of battries with different make but no solution found plaese suggest me a solution
This reply was originally posted by NGE on APC forums on 4/4/2013
Hi...you can charge battery for 8 hours, maybe battery unloaded. remember two sets battery must charged, do not on panel UPS only wire until charged
This reply was originally posted by Angela on APC forums on 4/4/2013
it may be helpful if you can provide and attach the log files (event.txt, data.txt, config.ini) from your UPS network management card so we can see what is going on. instructions on doing that are in the knowledge base -> http://www.apc.com/site/support/index.cfm/faq/ and search for article FA156131
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!