This was originally posted on APC forums on 8/29/2012
The handy-dandy video for battery replacement says to turn it over and the dead battery will fall right out. http://www.apc.com/site/support/index.cfm/faq/
But mine does no such thing.
First my battery is perpendicular to the unit, not parallel like the video.
Second, the wires are so short I cannot get the battery out and even if I could get the top wire unplugged, I'd never be able to reach in the crack to disengage the lower wire.
This reply was originally posted by Dakota on APC forums on 8/31/2012
Lol on the white covered black one one there a gap at the front, i always stuck a screwdriver in there and it would pop right off
This was originally posted on APC forums on 8/30/2012
BE750G. While taking a photo of it to post I dropped it and the battery fell out. Now I need to figure out how to get the wires oiff/on the battery. Photo attached.
Message was edited by: r2larson
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!