ViewX Home button disabled on DMZ Standby

[tkswathik]

I recently added a DMZ Standby server to our existing Hot-Standby server environment. ClearSCADA version is 2017 R3 (July 2019). When I login to the ViewX instance on a fully synced DMZ Standby server, the Home button on the ribbon is disabled. My user account has a home page assigned and this doesn't load automatically when I login.

However this is not the case when I login to the ViewX instance on the Main / Standby server (Not DMZ or Permanent Standby). The home button is enabled and the home page on my account loads without any issues on these servers

When I login to WebX on the DMZ standby server (http://localhost) the home page loads without any issues.

I changed the server role from DMZ Standby to "Lone server", surprisingly ViewX doesn't have the issues I mentioned above and everything works perfectly. I find it hard to believe if the server role has something to do with this issue. 

Has anyone had this issue before?

Thanks

[sbeadle · Accepted solution]

Hi,

yes, this issue was found and has been fixed. The correction is available in the June 2020 Monthly Updates and beyond.

See: https://tprojects.schneider-electric.com/telemetry/display/CS/Geo+SCADA+Expert+Downloads

Steve

[tkswathik]

Thanks !!