Should be able to use ports if required to verify flow the same as balancing valve.
Flow setpoint is set with dial on actuator.
Hi, Measuring the flow is a relatively complex topic using the P-T ports and actually varies depending on which type (size/design) of valve we are using.
Document: F-28105 describes in detail the exact process for verifying the pressure and flow through all the DN10-250 valves.
F-27984 is the equivalent document for the 1/2" to 10" valves in the US with units of measurement in PSI and GPM
Basically, on the smaller valves, DN10 to DN32 (3/8" to 1-1/4") then the two P-T ports available are only used to verify the working pressure supplied to the valve is at the needed minimum level for the differential pressure regulator to work effectively. If you do have the needed working pressure available, then you can be assured that the flow for any percentage setting scale on the valve is accurate and according to a document F-28130. This F-28130 document declares the flow for any stroke limit (ie. flow setting considering the valve stroke limit is dependant on the set point setting).
For the larger valves with three test ports where we are able to measure the full pressure drop across both the pressure regulator and the control valve portion of the valve as well as at the point in-between these components, then these pressures tapping's / readings are used alongside a table of effective Kvs to calculate the flow.. The comprehensive document guides: F-28105 Metric units / F-27984 - US units have these tables of effective Kvs/Cvs but there is also a simpler doc F-28088 available for just the DN40-250 valves.
The only way to get accurate flow measurement MyGiftCardSite is to use an independent flow measure device such as metering station. A flow reading can be obtained through the PIBCV using the kv value and an electronic flow computer. This will not be as accurate as a flow rate measured on a metering station.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!