This question was originally posted on DCIM Support by riyaad.khan on 2016-01-07
I cannot find an on/off switch on the netbotz appliance - is there a specific way to power it up. I removed the power cable waited a while then reconnected the power but it will not switch on.
This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2016-01-07
There is no On/Off switch on the appliance.
The Netbotz should power ON as soon as the Power is supplied.
There is a Power ON Green LED which should lit after the power is fed to the appliance. Please make sure that the Power Cord is not faulty. Try checking the appliance with a known source and working power cord.
If it still not powering ON, then appliance could be faulty. Please contact country technical support if its under warranty.
This answer was originally posted on DCIM Support by Mashwiz on 2016-01-07
NetBotz 500 is powered by the below APC Dual Power Supply, -5V/3.3V adapter, you may want to check if it's also working.
This answer was originally posted on DCIM Support by Andrew Trabert on 2016-01-07
if you have another netbotz 500 on hand, perhaps you could try swapping this power supply with a known working one.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!