This question was originally posted on DCIM Support by Enric Climent on 2017-12-01
A customer has a camera Pelco IJP121-1IS and a Netbotz 570 and I want to know if I need to manage the camera trough the Netbotz or direct with DCE via SNMP.
This answer was originally posted on DCIM Support by Miguel angel solans on 2017-12-01
you have to configure and detect the camera in NB570, and in DCE you need licences and configure the camera as a NB device.
But i detect some issue in the comunication between NB and DCE than can´t resolve.
This answer was originally posted on DCIM Support by Steven Marchetti on 2017-12-01
The only way to view images of a supported Pelco camera in DCE is to monitor that camera via NetBotz appliance and then have DCE monitor that appliance. You may be able to add the device to DCE using SNMP but the only thing you'll get there are SNMP values and no images. I'm not sure what values you'd get via SNMP and I don't believe there are any current DDFs.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!