This question was originally posted on DCIM Support by sonriv on 2018-03-16
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Steven Marchetti on 2018-03-16
I'm not sure exactly what you're looking for but if it is specifically Modbus, some PDUs have a Modbus output directly. DCE also can be polled for Modbus information as well using the AP95MODBUS license key but it is limited to 247 devices. If you're looking for something else, please provide more detaill in what you're looking for.
This comment was originally posted on DCIM Support by sonriv on 2018-03-16
Hi Steve thanks for the information, i have existing BMS using SBO 1.8 now i have plan to integrate the PDUs AP8853 to my BMS, what the best way to integrate?
This comment was originally posted on DCIM Support by Steven Marchetti on 2018-03-16
Although some of the larger units do have Modbus, for now at least, the AP8853 doesn't have a modbus option...nothing I am aware of in planning either.
For this unit to be monitored via modbus over IP, assuming you have StruxureWare DCE as you've tagged this post with DCE and DCO, you would need the AP95MODBUS license key and you could then monitor up to 247 devices through DCE using modbus over IP.
You could also look for something like an SNMP to modbus gateway but APC doesn't have that option (outside of DCE).
DCE doesn't directly integrate with SBO like a plugin may but you can poll it's devices via modbus.
This answer was originally posted on DCIM Support by Michael Meirovitz on 2018-03-18
You may try UCME-SmartConnector™. UCME-SmartConnector™ is an Alert Notification software for Schneider Electric’s EcoStruxure Building Operation (SBO) system.
UCME-SmartConnector™ can be used to send SBO alarms & system alarms via: SMS, Push, Email and Voice-over-Telephony. SBO alarms can be acknowledged remotely via SMS.
SBO values can be modified or queried remotely.
For more information visit our web site at: http://www.controlsee.com/u-c-me-opc/ucme-smartconnector/ucme-smartconnector-features/
This answer was originally posted on DCIM Support by Christopherus Laurentius on 2018-03-19
Alternatively, SBO can get rack PDU data & alarm from DCE using EWS. Look up for documentation on EWS for SBO & DCE.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!