This question was originally posted on DCIM Support by Minh Pham on 2018-07-31
can i disable the door sensor in Netbotz 250?
Solved! Go to Solution.
This comment was originally posted on DCIM Support by spezialist on 2018-07-31
Dear Minh Pham,
Please clarify your question/problem and, if possible, provide explanatory screenshots. And then you will be helped here faster and better 😀.
This answer was originally posted on DCIM Support by Steven Marchetti on 2018-07-31
If all you want to do is disable the alerting for a door sensor, click the listing for "More" off to the right of door sensors on the home page. Then click the specific sensor you're concerned about. Next, just uncheck enabled:
If the device is alerting through DCE, you can set schedules for alarming for the threshold itself and in the specific alarm profiles. As spezialist noted however, you'll want to be more specific about your requirement if you need a more indepth configuration.
This comment was originally posted on DCIM Support by Minh Pham on 2018-08-01
Thanks for quick respond and very clear answered. I could not see the page as you mentioned. However, the error is fixed after re-loaded firmware 6.5.6.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!