This question was originally posted on DCIM Support by Gleb Tyunikov on 2019-09-25
I am trying to configure my DCE server to receive traps from my PDU which is from Raritan.
I was wondering if DCE has the option of receiving traps from non APC devices and if so what configuration has to be made on the DCE server except for the SNMP server configuration tab.
Thank you for the help
Solved! Go to Solution.
This answer was originally posted on DCIM Support by spezialist on 2019-09-25
Dear Gleb Tyunikov,
From your question:
I was wondering if DCE has the option of receiving traps from non APC devices...
Unfortunately, this is still not supported (for non =SE= devices). If you wish, you can write again about this on the web resource Product Feedback.
This comment was originally posted on DCIM Support by Gleb Tyunikov on 2019-09-25
Thank you for the answer, is there a plan for this feature to be added?
This comment was originally posted on DCIM Support by Brunner Ueli on 2019-09-25
Would be nice if this could be added
This comment was originally posted on DCIM Support by spezialist on 2019-09-25
I can’t know this, but this topic has been discussed here for a long time (try searching here and you will see for yourself).
By the way, the DCE-server cannot analyze SNMP traps. A DCE-server can only receive SNMP traps from native =SE= devices as simple signals. Then, after the DCE-server receives such a "simple signal", it simply scans the device immediately (without waiting for your turn in accordance with the set scanning interval). Therefore, for your desire to receive SNMP traps from non =SE= devices, this may not be suitable.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!