connect comx210 to DCE?

[DCIM_Support]

This question was originally posted on DCIM Support by Samir Sörensen on 2018-09-13

---

Hi all,

Where can i find DDF for com´x 210 so i can scan for it i DCE?

https://www.schneider-electric.com/en/product/EBX210

BR//

Samir

(CID:134031389)

[DCIM_Support]

This answer was originally posted on DCIM Support by spezialist on 2018-09-13

---

Dear Samir Sörensen,

I would first try downloading the Modbus DDF-file powerlogic_210.xml from the Device Support resource, that is, for device PowerLogic PM210:

Then you will need to import this DDF-file into DCE software and see if it will work properly.

If not, then on the above specified resource, you can immediately make a new device support request and after a while DDF-developers will contact you to specify the details and the time of completion of work.

I hope this helps you.

With respect.

(CID:134031474)

[DCIM_Support]

This comment was originally posted on DCIM Support by Samir Sörensen on 2018-10-08

---

Tanx for the answer but it didn´t work. I need a new DDF. 

BR,

//Samir

(CID:134680186)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-10-08

---

Dear Samir Sörensen,

Ok, I hope you created the correct device request on the above resource? There is also an explanatory video.

If you have more questions, please ask.

With respect.

(CID:134680220)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-10-07

---

Dear Samir Sörensen,

Tell us, please, did you solve your question or not?

With respect.

(CID:134680009)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.