This comment was originally posted on DCIM Support by spezialist on 2017-07-19
Can you clarify your question?
In general, as a rule, Alarm Beacon is physically connected to either a NetBotz-200/150 device (not appliance) or a NetBotz appliance (for example, NetBotz-450 or other). Therefore, the basic setting of the Alarm Beacon behavior is performed on these devices.
In the case of the NetBotz appliance, it sends alarms themselves, for example, when Alarm Beacon is turned on.
When use NetBotz-200/150 device (not appliance) then DCE-server can sends alarms (e-mail, for example) according to them, for example, when the Alarm Beacon is turned on (this behavior of the DCE-server can be easily changed).
This comment was originally posted on DCIM Support by Stine Hansen on 2017-10-04
Hi kanit.s, did you find an answer to your question?
This answer was originally posted on DCIM Support by Stine Hansen on 2018-02-01
I'm assuming that you've found a way to configure so I'm closing this question. If you still have this issue, please feel free to ask another question.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!