This question was originally posted on DCIM Support by Christian Riis on 2017-11-07
A potential customer has an issue with wireless NetBotz temperature sensors - the sensors are visible in DCE, but not in DCO. Other (wired) temperature sensors show up fine.
The NetBotz sensors are updated to the latest firmware.
What could be the issue?
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2017-11-07
I notice that your DCE version is 7.4.1. If possible, can you please upgrade to 7.4.3, and check if you are able to see the wireless sensors? I think that there was an update to the DDF file for Netbotz 250 in DCE 7.4.3
I also request you to make sure that NBRK0250 firmware also is the latest firmware version.
I hope this helps.
This comment was originally posted on DCIM Support by Cees de Vogel on 2017-11-08
Hi Christian, DDF is in your mail
This comment was originally posted on DCIM Support by Christian Riis on 2017-11-09
This comment was originally posted on DCIM Support by Christian Riis on 2017-11-23
Upgrading to the latest version of DCE solved the issue. The wireless sensors are now shown in DCO.
Thanks Balaraman Jagadeesan
This comment was originally posted on DCIM Support by Balaraman Jagadeesan on 2017-11-23
You are welcome Christian!
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!