Where can I get GPL source for NetBotz 550

[DCIM_Support]

This question was originally posted on DCIM Support by Yanwen on 2019-06-12

---

(CID:144869066)

[DCIM_Support]

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-06-13

---

Hi Yanwen,

NetBotz firmware or BotzWare is not open source. We do not provide source code for these appliances. 

Thank you,

Steve

(CID:144869184)

[DCIM_Support]

This comment was originally posted on DCIM Support by Yanwen on 2019-06-13

---

From document

NetBotz Appliance User’s Guide 990-3288G

but now it can't be accessed

(CID:144869210)

[DCIM_Support]

This comment was originally posted on DCIM Support by Steven Marchetti on 2019-06-14

---

That is indeed an old site (I believe down for 8 years or more) and potentially an older manual. Do you have a link to that manual?

I checked the NetBotz 570 user guide:

https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=LSCZ-7BUKZ9_R9_EN.p...

and I do not find this information contained within.

(CID:145424584)

[DCIM_Support]

This comment was originally posted on DCIM Support by Yanwen on 2019-06-14

---

http://bit.ly/2ZxYTuP 

(CID:145424618)

[DCIM_Support]

This comment was originally posted on DCIM Support by Steven Marchetti on 2019-06-14

---

Thanks, as I mentioned, those are old manuals (not even on our sire any more) but I'll see if there is any documentation or old link, I can't promise anything.

(CID:145424626)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.