This question was originally posted on DCIM Support by Frans de Groot on 2018-03-19
customer has DCE and wants to see more than only the display firmware version like the main controller and power module firmware versions.
The only thing you see now is the Display firmware version.
See picture below
Is there a possobility to see the firmware of the main controller and the firmware of the power modules ?????.
and if not will this come in a newer version of the DCE visible ??.
Hope to hear from you soon.
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Steven Marchetti on 2018-03-19
From what I can see, these values are not available in the modbus register map for the Symmetra MW. If the device does not output the value, StruxureWare DCE can not provide that value in it's interface. To get DCE to show these values, you'd need to have those values in the device then have the DDF team include the values in the DDF. Your request would need to be made of the UPS engineering team, not DCE.
This comment was originally posted on DCIM Support by Frans de Groot on 2018-03-19
Thanks Steve for your quick answer.
This comment was originally posted on DCIM Support by Steven Marchetti on 2018-03-19
Sent off-line email
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!