Stulz WIB8000 SNMP mib file

[DCIM_Support]

This question was originally posted on DCIM Support by Nasir on 2019-03-21

---

Hi

I have WIB8000 connected with Stulz units . I have done SNMP configuration on WIB8000 but to configure WIB8000 on SNMP agent i have required MIB file . Can you please share

(CID:141265510)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by spezialist on 2019-03-21

---

Dear Nasir ,

I suspect, that you need to integrate your WIB8000 with a DCE-server?

Then you need the SNMP DDF-file stulz_wib.xml for WIB8000, not the MIB-file. How to do this is written in topic Can anybody give me the Modbus ddf files for Stulz C7000 & for WIB 8000, that is, download from the DDF resource:

I hope this is what you need.

With respect.

(CID:141265520)

[DCIM_Support]

This comment was originally posted on DCIM Support by Nasir on 2019-03-21

---

Dear spezialist   Thanks for answering. No i don't want to integrate with DCE rather i want to integrate WIB8000 with our own Network Operation Center OSS platform which support SNMP for that i have required SNMP Mib file.  

(CID:141265531)

[DCIM_Support]

This comment was originally posted on DCIM Support by Nasir on 2019-03-21

---

I required MIB to get traps on agent ( OSS Platform)

(CID:141265539)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-03-21

---

Dear Nasir ,

Then it is best for you to contact the vendor of your device with this question, but not to =SE=.

I have the MIB-file you need, and I can send it to you via private e-mail. I hope this MIB-file is still up to date.

With respect.

(CID:141265545)

[DCIM_Support]

This comment was originally posted on DCIM Support by Nasir on 2019-03-21

---

dear spezialist thanks for your support

(CID:141265548)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.