Struxurware relay output

[DCIM_Support]

This question was originally posted on DCIM Support by jonas dahlgren on 2018-09-10

---

(CID:134029265)

[DCIM_Support]

This answer was originally posted on DCIM Support by Steven Marchetti on 2018-09-10

---

Hi Jonas,

If your post was supposed to be a question asking if DCE can directly control an output relay, the answer is no. If you're asking if we can monitor an output relay, yes as long as it is a NetBotz or SNMP/Modbus device.

If you're looking for some other information, please be more specific in your post.

Steve

(CID:134029285)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-10-07

---

Dear jonas dahlgren,

Tell us, please, did you solve your question or not?

With respect.

(CID:134680033)

[DCIM_Support]

This comment was originally posted on DCIM Support by jonas dahlgren on 2018-10-08

---

Yes I did, thank you for your support!

(CID:134680198)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-10-08

---

Ok, very thanks for the good feedback 😀.

(CID:134680202)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.