This question was originally posted on DCIM Support by bcelenk on 2017-08-11
I installed StruxureWare DCE server using the following link: Deploying and configuring a StruxureWare Data Center Expert virtual appliance
Then I installed the DCE client on another virtual machine (Windows 10). I added an HTTP Post alert action and whenever I try to test it, it says check the destination but in the logs:
Aug 10 14:09:07 server1 nbSendHTTPAlert: Send HTTP Alert started
Aug 10 14:09:07 server1 nbSendHTTPAlert: Error posting to url https://hookb.in/Ezg5moDG: HTTP code=0, err=6
Also when I click on StruxureOn > Registration it says:
"Error communicating with www.struxureon.com. Please check your firewall and proxy settings.
I'm pretty sure that my windows machine has internet connection and has a disabled firewall. I also tried with another VM, so probably the problem is with the server VM (CentOS).
Any help would be appreciated.
This answer was originally posted on DCIM Support by Ed Tarento on 2017-08-11
Have you configured the gateway IP on the DCE server?
This comment was originally posted on DCIM Support by bcelenk on 2017-08-11
I set the default gateway to my system's private IP.
My private IP is :192.168.1.105
VM IP: 192.168.1.155
Subnet Mask: 255.255.255.0
This answer was originally posted on DCIM Support by spezialist on 2017-08-11
Hi Bener Celenkoglu,
I'm pretty sure that my windows machine has internet connection and has a disabled firewall.
In your case, you must provide network access to the Internet, not for a DCE-client, but for a DCE-server.
I.e., in the first case according to StruxureWare Data Center Expert Security, it is necessary to check the outgoing network access from the DCE-server to the host https://hookb.in/Ezg5moDG using the HTTPS protocol (443 port).
In the second case, according to https://struxureon.com/system-requirements/, it is necessary to check for outgoing network access from the DCE-server to hosts 220.127.116.11 and 18.104.22.168 using the HTTPS protocol (443 port).
This comment was originally posted on DCIM Support by spezialist on 2017-08-14
Hi Bener Celenkoglu,
Have you solved this problem or not?
This comment was originally posted on DCIM Support by bcelenk on 2017-08-14
Unfortunately, I couldn't solve the problem. However, my main goal is to develop an integration with DCE so I used my private IP address to send the HTTP POST. That's enough for me now to develop the integration. Thanks you for following the issue, I appreciate it.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!